Boats
Contact Information
HYDROTON
Industrial Coatings
16th Km of New National Road Thessaloniki-Kilkis
Tel.. +30 23940-31465
Fax. +30 23940-31525
e-mail: hydroton@hydroton.gr
OMEGA EPOXY 201 ENAMEL
EPOXY 201 ENAMEL is a two component paint based on epoxy resin and polyamid resin as curing agent. The paint is set by the polymerization of the two components into a hard and elastic film which is adhered strongly on the clean and dry surface.
RECOMMENDED USE
The paint is used mainly for anticorrosive protection of any construction and machine. It is alkali and acid resistant as well as petroleum, gasoline and their derivatives. The paint has excellent resistance to sea water and is perfectly used for protection of metallic constructions near the sea.
SURFACE PREPARATION
We apply one or two coats, in surfaces prepared by OMEGA EPOXY PRIMER. Directly in metallic surfaces, we clean them very well from oils, dust, rust or we sandblast, then we apply one or two coats.
LIMITATIONS
Minimum temperature of polymerization 10o C.
Maximum rate of atmospheric humidity 75 %.
APPLICATION DETAILS
- Stir the paint well before its use. The product is applied by spray gun, airless and by brush on smaller surfaces.
- Ratio: A' component 4,3 p.b.W. , Β' component 0,7 p.b.W.
- Pot life : At 23o C 6 hours
- Dilution: 5 - 25 % with solvent N' 201.
- Tools cleaning: with solvent Ν΄201.
SAFETY
Use the product to well ventilated place. Wear suitable protective gloves, eyeglasses and face protection.
SHADE
Various shades
FINISH
Gloss
PHYSICAL DATA
| Volume solids | 42 % ± 1 |
| Specific gravity | 1,2 ± 0,05 Κg / Lt |
| Theoretical spreading rate | 10 - 12 m2 / Lt |
| Indicated dry film thickness | Dry film 40 -50 μm |
| Drying time | |
| - Dry to touch | 2 hours 23o C 50 % Related humidity |
| - Final | 3-4 hours 23o C 50 % Related humidity |
